THIS MACHINE IS FULLY CONTROLLED BY HYDRAULIC SYSTEM. It is suitable for outsole attaching of jogging shoes, walled sports shoes and casual shoes. The operation of outsole pressing, and front-rear pressing can be accomplished simultaneously or respectively. The heavy pressing force and firm attaching effect save much manpower. This automatic sole attaching mechanism makes an even and perfect pressing which helps the shoe industry upgrading.
There is a prepared oil-tank to supplement oil when cylinder rising which makes the rising faster and saves the operation time to increase benefit.
The hydraulic automatic balancing system is adopted for the mechanism of pressing rodes. The height of rods need no manual adjustment, which helps simplify operation.
The design of automatic bias angles setting for the mechanism of pressing rods makes shoes locating easy and even for boots.
When the mechanism of front –rear pressing recedes, a special circuit device is adopted to control the receding stroke, and the proper receding distance is accordingly for locating different sizes of shoes.
There is a pressure adjusting function for every operation which makes the pressing result perfect.
Automatic balancing rods and swing attaching mechanism.
The height of attaching rods is controlled by hydraulic automatic balance system so that it is not necessary to adjust the attaching rods when the height of last is different also it could ensure the pressure of the two attaching rods almost the same and the attaching power on every point of the sole is the same. The attaching rods can swing simultaneously. It is convenient to put and take out of the last. The design is better than the old design of the machine with fixed attached rods
Side attaching mechanism :
The side attaching adopts whole hydraulic control. There are nine pcs of rubber foaming pressing objects to make a tight pressing according to the shape of shoes. Each foaming pressing object is controlled by an individual cylinder which pressure reaches to 25-70kgs.Two sets of these foaming pressing objects each in the front and the rear for options to ensure the best performance of side attaching.
Special function for qf-818b :
a.there are eighteen pressing pads on the bottom of pressing mechanism. The pads are controlled by cylinders to up and down to firm the shapes of different shoes.
b.the pressing pads can be changes with different height ones or be modified to meet different shapes of outsoles without using molds so as to save much cost.